GO!! 1 STEP CUT & POLISH

Description

Here is the cutting and finishing polish you have always been looking for!

GO!! 1 step cut & polish was designed to use in direct sunlight on the hardest or softest of paints. Great cut and great finish, a true one step polish that’s body shop safe! This new blend utilizes our custom tempered abrasives and a lubrication system that allows you to work the polish as long as you’d like. Wipe off is a dream! The best part is that you can use half the amount of polish you’re used to and get at least the same or better cut and finish. Half the product means value! This polish will remove up to 1000 grit sanding scratches with a rotary polisher and will finish to a brilliant gloss on the softest black paints. This one polish is all you need! We have formulated this amazing polish with a priming catalyst so you can apply your protective products directly over the polished area after it has been wiped away. GO!! 1 step was designed to be used with GO!! Ceramic Coating as the finishing step, but you can use any protective product you choose after polishing.

Directions: Use on a rotary or dual action polisher. Use the highest speed on your da and medium pressure for 3 passes to make a section pass. Polish a 2ft by 2ft section at a time. Wipe residue with a clean microfiber towel. Inspect the paint correction that took you no time flat.

Once your pad is primed, USE HALF THE AMOUNT OF POLISH YOU WOULD NORMALLY USE WITH YOUR “GO TO” POLISH! Also, work it HALF as long as you generally would. This will absolutely be your new “GO TO” polish!